Silos «SYMAGA», Spain
SPECIFICATIONS silage flat bottoms
Diameter: 4.6 to 32 08 m. Capacity: 65 to 13,500 tons (0.75 tons of wheat / m3 seal 6%).
vessel top grain storage
All roofs Silo SYMAGA have a slope of 30 degrees for optimum load capacity nadsilosnyh galleries, conveyors and other equipment. The slope of the roof is 30 degrees and corresponds to the angle of repose of the grain boot that prevents overfilling and subsequent damage to the roof. The roof panels are mounted Silo SYMAGA overlap, forming a one-, two- or three-tier structure. Such a roof construction together with crimping panels gives additional structural strength. On request made panels with prefabricated holes for installing a duct (ducts). Roof Silo diameter of more than 12.98 m have the spacer ring, as supplied with special design, which is designed to maintain not only the dead weight of the roof, but also the load of transport equipment, galleries, sediment load, and so on. D. No need to change linings silage. Quality galvanizing: 450 g / m2 according to the standard UNE-EN-10326: 2004.
PANELS perforated steel CYLINDER
in silos SYMAGA used automatic punching vertical panels to ensure a firm connection. Each panel is crimped at the factory sheet metal, the quality of which is closely monitored. Steel quality: S 350 GD according to the UNE-EN-10326: 2004. Quality galvanizing: 450 g / m2 according to the standard UNE-EN-10326: 2004.
distribute vertical loads to the foundation of the silo. The ribs provide strength and durability, as well as the stability of the structure of the silo. Besides the distribution of external ribs prevents contamination of grain that occurs when the ribs are arranged inside the silo
Standard Gallery consists of two sections, each 700 mm, with double auxiliary handrail height of 1.1 m. One of the sections is used as a gallery for the maintenance of the silo and the other is designed for installation of the conveyor. Gallery beams made of galvanized U-shaped width of 263 mm. Standard Floor Gallery & mdash; perforated galvanized steel sheet thickness of 3 mm. Steel quality: S 280 GD in accordance with UNE-EN-10326: 2004 galvanizing quality: 275 g / m2 according to the standard UNE-EN-10326: 2004
Depending on the load on the silo supports may be single, double, or in the form of columns. When heavy loads are used ext. crossbars, which are mounted on a support for improved load distribution. All supports are connected to the ribs to distribute loads directly to the ground. Steel quality: S 280 GD in accordance with UNE-EN-10326: 2004 quality galvanized: 275 g / m2 according to the standard UNE-EN-10326: 2004
Sealing panel joints capacitances represents gasket 6 mm in diameter made of a rubber composition based on butyl rubber.
Each bolt has a special sealing gasket for a perfect protection against ingress of precipitation. Dichromated galvanized bolts by electrolytic galvanizing and passivation, the last test spray saline, according to DIN 50021 & mdash; a minimum of 250 hours without corrosion. The bolts are made according to DIN 993; strength class 8.8 or 10.9 steel. Nuts are manufactured according to DIN 934; strength grade steel 5.6.