Silos, Hoppers «SYMAGA», Spain
SPECIFICATIONS silage conical bottom
Diameter: from 4.6 to 12.23 m.
Capacity: from 70 to 2100 tons (wheat 0.75 t / m3, the seal 6%).
The support legs are elongated ribs cylinder (also galvanized - a method of hot-dip galvanized). Connection Connect to the ribs to give extra stability to the construction of wind naruzkam and other external factors. For resistance to high loads in large silo-hoppers at the junction of the cylinder and the funnel placed compression ring made of galvanized steel (a method of hot-dip galvanized).
Each section of the funnel is made of a single sheet of galvanized metal (except silo hopper with a diameter of 6.1 m and an inclination angle of 60 & deg ;, sector funnels are made of double galvanized sheet).
Quality of steel: S 350 GD in accordance with UNE-EN-10326: 2004
Quality galvanizing: 450 g / m2 according to the standard UNE-EN-10326: 2004
Standard Gallery consists of two sections, each having a width of 700 mm double auxiliary handrail height of 1.1 m. One of the sections is used as a gallery for the maintenance of the silo and the other is designed for installation of the conveyor. Gallery is made of galvanized U- shaped beam width of 263 mm. Standard Floor Gallery & ndash; galvanized perforated steel sheet thickness of 3 mm.
Quality of steel: S 280 GD in accordance with UNE-EN-10326: 2004
Quality galvanizing: 275 g / m2 according to the standard UNE-EN-10326: 2004
Depending on the load on the silo support can be simple , or in the form of double columns. When heavy loads are used ext. crossbars, which are mounted on a support for improved load distribution. All supports are connected to the ribs to distribute the load directly to the ground.
The quality of Steel quality: S 280 GD in accordance with UNE-EN-10326: 2004
The quality of galvanizing: 275 g / m2 according to the standard UNE-EN-10326: 2004
Sealing panel joints capacitances represents gasket 6 mm in diameter made of a rubber composition based on butyl rubber.
Each bolt has a special sealing gasket for a perfect protection against ingress of precipitation. Dichromated galvanized bolts by electrolytic galvanizing and passivation, the last test spray saline, according to DIN 50021 & ndash; a minimum of 250 hours without corrosion. The bolts are made according to DIN 933; strength class 8.8 or 10.9 steel. Nuts are manufactured according to DIN 934; strength grade steel 5.6